Use these Adapters in situations where mounting of a base or extension unit on a DIN rail is required.
Note: DIN rail mounting is not recommended in locations where high vibration or mechanical shock exists.
iQ Platform Base Units
The high speed iQ base units utilize a secondary inter-CPU bus to share more data at faster speeds between up to 4 iQ CPUs. Non-iQ CPUs may be used on the base unit, but will not increase in performance.
|
Model Number |
Q35DB |
Q38DB |
Q312DB |
|
Stocked Item |
S |
S |
S |
|
Certification |
UL • cUL • CE |
||
|
Expansion Slots (Excluding 1st CPU Slot) |
5 |
8 |
12 |
|
Applicable I/O and Intelligent Function Modules |
Q Series/iQ modules |
||
|
Dimension (W x H) mm (in) |
245 x 98 (9.65 x 3.86) |
328 x 98 (12.92 x 3.86) |
439 x 98 (17.30 x 3.86) |
|
Weight (kg) |
0.32 |
0.41 |
0.54 |
|
Accessories |
4- M4 x 14 base unit mounting screws |
||
|
Model Number |
Q33B |
Q35B |
Q38B |
Q38RB |
Q312B |
|
Stocked Item |
S |
S |
S |
- |
S |
|
Certification |
UL • cUL • CE |
||||
|
Number of Expansion Slots |
3 |
5 |
8 |
8 |
12 |
|
Applicable I/O and Intelligent Function Modules |
Q Series/iQ Platform |
||||
|
Redundant Power Supply Slot |
No |
No |
No |
Yes |
No |
|
Dimension (W x H) mm (in) |
189 x 98 (7.45 x 3.86) |
245 x 98 (9.65 x 3.86) |
328 x 98 (12.92 x 3.86) |
439 x 98 (17.30 x 3.86) |
|
|
Weight (kg) |
0.21 |
0.27 |
0.36 |
0.47 |
0.47 |
|
Accessories |
4- M4 x 14 base unit mounting screws |
||||
Use these Adapters in situations where mounting of a base or extension unit on a DIN rail is required.
Note: DIN rail mounting is not recommended in locations where high vibration or mechanical shock exists.
|
Type |
Applicable Base or Extension Base |
Stocked Item |
|
Q6DIN1 |
Q38B, Q38DB, Q312B, Q312DB Q68B, Q612B |
S |
|
Q6DIN2 |
Q35B, Q35DB Q65B, Q00JCPU-S8, Q00UJCPU |
S |
|
Q6DIN3 |
Q33B, Q52B, Q55B, Q63B |
- |
Use extension base units (also known as extension racks) in systems that require more modules than can be accommodated on the main base unit. Extension base units are available with a slot for an additional power supply (Q6_B) or without (Q5_B). Use Q6_B extension bases in systems where the current supplied by the base unit power supply is insufficient for the whole system. Up to 7 extension base units may be connected to the base unit, allowing a total of 8 bases. The 8 base units may be extended over a distance of up to 13.2 m (43.28 ft). The maximum number of installed modules is 64. If your system requires more modules or greater distances, consider using a network to link the system together. See the network section for more details.
|
Model Number |
Q52B |
Q55B |
Q63B |
Q65B |
Q68B |
Q68RB |
Q612B |
Q65WRB (*1) |
|
Stocked Item |
S |
S |
- |
S |
S |
- |
S |
S |
|
Certification |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
UL • cUL • CE |
|
Number of Expansion Slots |
2 |
5 |
3 |
5 |
8 |
8 |
12 |
5 |
|
Power Supply Module Slot |
No |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Redundant Power Supply Slot |
No |
No |
No |
No |
No |
Yes |
No |
Yes |
|
Dimensions (W x H) mm (in) |
106 x 98 |
189 x 98 |
189 x 98 |
245 x 98 |
328 x 98 |
439 x 98 |
439 x 98 |
439 x 98 |
|
Weight (kg) |
0.14 |
0.23 |
0.23 |
0.28 |
0.38 |
0.49 |
0.48 |
0.52 |
These cables are used to link main base units to extension base units.
They are available in a variety of lengths from 0.45m (1.48 ft.) to 10m (32.8 ft.).
|
Model Number |
QC05B |
QC06B |
QC12B |
QC30B |
QC50B |
QC100B |
|
Stocked Item |
S |
S |
S |
S |
S |
S |
|
Certifications |
CE |
CE |
CE |
CE |
CE |
CE |
|
Cable Length (m (ft)) |
0.45 (1.48) |
0.6 (1.97) |
1.2 (3.93) |
3 (9.84) |
5 (16.39) |
10 (32.79) |
|
Weight (kg) |
0.15 |
0.16 |
0.22 |
0.40 |
0.60 |
1.11 |
